[. . . ]  our diminuer l’encombrement du transat, par exemP ple pour le transport en voiture, il suffit de décrocher la partie (A) en appuyant sur les boutons comme indiqué dans la figure 5. WARNINGS •  ARNING: Never leave the child unattended in the W bouncing chair. €  WARNING: It is dangerous to use this reclined cradle on an elevated surface, e. [. . . ] €  eriodically check the Bouncing Chair’s frame and P seat fabric for wear, damage, or missing components. Should any parts be missing or damaged, the Bouncing Chair’ must not under any circumstances be used. €  lease refer to the care label for instructions on how to P clean the product. A •  fter cleaning, check that the fabric and seams are not A worn or damaged. COMPONENTS A – Rear legs B – Rear handle C – Carry handles D – Side joint to unlock the backrest E – Front joint to adjust the leg rest F – Crotch strap G – Legs H – Central button of safety harness buckle I – Safety harness prongs HOW TO ASSEMBLE THE PRODUCT Before use, the baby-bouncing chair requires a very simple assembly operation.  urn the legs (G) in an outward direction and fit the T rear part (A) into legs’ holes, pressing the locking buttons (diag.  his operation may be carried out by fitting part A, in one T way only, in order to prevent any assembly errors (diag.  ou will hear a click, signalling that part A has been Y fitted into position; ensure that the part has been fitted correctly by trying to pull it away from the frame (diag.  lso, ensure that the carry handles (C) of the bouncing A chair are facing outwards with respect to the legs; diagram 4 shows the correct position.  you wish to make the bouncing chair more compact, for example for car transport, it is sufficient to unlock part A, pressing the buttons highlighted in diagram 5.  nfasten the safety harness by pressing the central button on the buckle (H) and, at the same time, remove the other part of the buckle, by pressing its prongs (I) (diag.  lways fasten the safety harness, inserting it through A the crotch strap (F), and check that the harness fastens baby correctly and that it is adjusted/tensioned correctly (diag. 8) and recline the backrest to the desired position; lock the joints by turning them in the opposite direction (diag. This operation may be carried out with 12 the child sitting in the bouncing chair, although it can be more difficult. [. . . ]  o replace the cover onto the bouncing chair, repeat T the above operations in the reverse order, sliding the lower fabric strap through the adjusting joints of the backrest (D), as shown in diagram 15. WARNING: Fit the safety harness again, checking that it has been fitted correctly through the holes of the “D” rings and the crotch strap. For further information or spare parts requests, please contact Chicco UK Ltd Customer Service: Postal address: CHICCO UK LTD PROSPECT CLOSE KIRKBY IN ASHFIELD NOTTINGHAMSHIRE - NG17 7LF Telephone: 01623 750870 Website: www. [. . . ]